"GREEN CRAFTED" from the HIGHEST quality, RAPIDLY RENEWABLE grasses, reeds, bamboo, Certified Organic, TrueGreen Hemp™ or other cellulosic fibers in whole, part, trimmed, twisted, or braided to obtain truly unique patterns. Our naturally superior materials are primarily gathered in Central America as opposed to Southeast Asia, substantially reducing green house gas emissions associated with transportation while enhancing local economies and lifestyles.

ENERGY EFFICIENT: All patterns have a naturally impressive degree of insulating and sun shading properties that may increase the energy performance of your window system allowing additional control of your climate and wallet. Introducing the industries first and only chemical free Hemp Insuliner™ with an average calculated “R” value of 4.5!

NATURAL coloration is obtained from the materials natural state, sun bleaching, oven baking, or the use of an applied water based wash to three patterns only, assuring even, natural, safer, and enduring beauty without the off-gassing that plagues similar looking materials.

HEALTHY: Finishes, chemicals, lacquers, or other commonly used or mandated “finishes” are NOT necessary thanks to our extreme care and attention to quality and respect for the inherent properties of the material insuring lasting durability and better indoor air quality.

QUALITY: Distinctive hand crafting by three generations emphasizes our commitment to people and planet by celebrating both International and Domestic Fair Trade. Distinctive hardware includes operational, non-corroding (recycled) metal pulleys, in place of industry standard plastic increases the wearability of operating cords remarkably.

CUSTOM VERSATILITY: Earthshade™ Natural Window Fashions™ are available in numerous operating styles including Top-down/ bottom-up and custom motorization by remote control and/or wall switch (low EMF) making our blinds the ideal solution for any circumstance. Call today to speak with our Certified Safetech™ Motorization experts.

ECO-SAFE: shades can be prepared to meet commercial fire codes with an optional WATER & MINERAL based, LOW-TOXICITY fire retardant, making our shades the ideal “designer” option for ALL commercial applications.

EARTH FRIENDLY: All custom shades come standard with our revolutionary customer care, and our lifetime limited warranty, effectively promoting peace of mind for people and planet, while "Supporting your view of the world™"

1. Print these instructions and follow for each and every window. Window sizes often vary by as little as 1/8 of an inch, potentially affecting proper fit and or operation of shades.
2. Take each measurement two (2) times and be 100% confident. You are responsible. Errors are correctable only by purchasing a new properly measured shade.
3. Use a steel measuring tape and round down each measurement to the nearest 1/8 of an inch.
4. For large windows we recommend using two or three shades on one headrail. This will reduce the load placed on the lifting mechanism extending the life of the shades greatly. You can measure to place the edges of butted shades over the center of mullions.

INSIDE MOUNT (RECESSED)

For a clean look allowing trim features to shine. The shade will hang inside the window frame. NOTE: to ensure a flush mount with the front of window trim, the recess must be a minimum of 2 3/4 inches (Some operating options require additional room). Sometimes it is desirable to use an inside mount and still allow an inch or so to hang out (project) beyond the window trim. This is a decision solely based on the look that you desire for your windows.

A forgiving look that can be used to hide imperfections in window framing or trim. Also used when window recess is less than the 2 3/4 inch minimum for flush inside mount (standard roman). The shade will hang outside the window, overlapping the trim or outside frame. This is also used to mount shades to doors. To minimize light leakage we recommend you add 2 inches to each side as well as top and bottom for windows without trim or molding. For openings with trim or molding, it is often desirable to measure from outside edge to outside edges for width and from top edge to top of sill (assuming it extends further than trim or molding) for length.

DOORS: OUTSIDE MOUNT (SURFACE)

Hinged and/or French DOORS can be measured for width ( DIM A ) from the edge of the glass to the edge of the hardware (escutcheon) then mounting the shade so that it is centered; balancing operation with coverage (shade may need assistance getting around lever). We further recommend providing an additional 2" to the top AND the bottom of the glass height to allow for mounting hardware to clear internal door components ( DIM E + 4"). PLEASE CALL FOR ASSISTANCE. Standard Roman is generally the only system that will work with lever handles.

NOTES: Due to the nature of the material; color, grain, texture, privacy and light transparency may vary according to the inherent growing characteristics of the materials.

Though we strive to control every last detail regarding our shade production, some patterns may not be suitable for our friends with chemical sensitivities.

Some patterns may require additional operating options based ordered dimensions, conditions, and or customer desires. An Moss Envy Representative will assist with recommendations.

Minor stretching and twisting is inherent to natural materials and may require a varying amount of time to acclimate. Sun exposure may cause discoloration or fading.